Features:

Tapered roller bearings with radial oriented mainly to bear radial and axial joint load. Bearing load capacity depends on the angle of the outer ring raceway, the greater the angle the greater the carrying capacity. This kind of bearing is separable bearings, rolling bearings according to the number of rows into single row, double row and four row tapered roller bearings. Single row tapered roller bearing clearance adjustment required to the user during installation; double row and four row tapered roller bearing clearance from the factory has been given based on user requirements, users do not need to adjust.
       
Tapered roller bearings have tapered inner and outer ring raceways, tapered roller arranged between the two. The surface of the projection lines of all cone bearing axis in the same point together. This design makes tapered roller bearings particularly suitable for bearing complex (radial and axial) loads. Most of the axial load bearing capacity is determined by the contact angle α; α angle increases, the higher the axial load capacity. Angle size of the computational coefficient e to represent; e greater the contact angle the greater the bearing axial load greater applicability.

Tapered roller bearings are usually separated type, that is, with roller and cage assembly of the inner components of the composition of the inner cone with tapered outer (outer) installed separately.

 

Industrial Applications:

Tapered roller bearings are widely used in automotive, mill, mine, metallurgy, plastics and machinery.

 

   

Bearing type		Aperture(mm)	OD(mm)	Width(mm)	Chamfer(mm)	Rated Load
New code	Old Code					Dynamic(N)	Static(N)
30204	7204E	20	47	15.25	1.0	25000	18000
30205	7205E	25	52	16.25	1.0	30000	23000
30206	7206E	30	62	17.25	1.0	39000	29500
30207	7207E	36	72	18.25	1.5	49000	37000
30209	7208E	40	80	19.25	1.5	55000	41500
30209	7209E	45	85	20.75	1.5	59000	46000
30210	7210E	50	90	21.75	1.5	66000	53500
30211	7211E	55	100	22.75	2.0	80000	64000
30304	7304E	20	52	16.25	1.5	31000	21200
30305	7305E	25	62	18.25	1.5	42000	29900
30306	7306E	30	72	20.75	1.5	51000	37000
30307	7307E	35	80	22.75	2.0	65000	49000
30308	7308E	40	90	25.25	2.0	83000	64600
30309	7309E	45	100	27.25	2.0	97000	76000
32306	7606E	30	72	28.75	1.5	71500	57900
32307	7607E	35	80	32.75	2.0	86000	70000
32308	7608E	40	90	35.25	2.0	102500	86500
32309	7609E	45	100	38.25	2.0	128000	111800
32310	7610E	50	110	42.25	2.5	160000	140000
32311	7611E	55	120	45.50	2.5	183500	161500
30615	7815E	75	135	44.50	2.0	----	----
360/47	7909E	47	100	43	1.8	121000	106000
LM11949/LM11910		19.05	45.237	15.494	1.3	29300	26700